5 thoughts on “The spray plate is dirty, is it cleaned with ultrasonic?”
Shelia
The spray board is recommended to use ultrasonic cleaning. one of the important components of the spinning machine. Its role is to transform the adhesive high polymer melt or solution to a fine flow of a specific cross -section through micropholic Or solidify the bath to form silk. During the spinning process, the spraying board will be blocked by mechanical impurities, carbon fiber, gels and other blocking pores. When the spray hole is blocked, the spinning surface will be flowing on the surface of the outer spray/board, causing the original silk to cause the original wire Elasticity of fibrousness and problems such as silk and silk hairs. When the spray hole is completely blocked, it will greatly improve the fiber's organs and have a great impact on the fiber quality. Therefore, it is necessary to clean the spray plate regularly. The traditional spray plate cleaning method, such as chemistry, physical or machinery, can cause the spray holes to wear, cause erosion, slight cracks, and irregular pores. Therefore In order to solve the problem of jets and cleaning processes, many factories are used to clean the spray plate. This -wave cleaning is a clean method of cleaning and effective in industry. The working principle is that when the ultrasonic fluid is spread, the tiny bubbles in the cleaning solution are vibrated under the action of the sound field. When the sound pressure reaches the sound pressure, the sound pressure reaches the reach After a certain value, the bubbles will increase rapidly, and then burst into a shock wave that can reach thousands of atmospheric pressure instantly. The shock wave reduces stains and the adhesion of the cleaned workpiece can destroy insoluble stains and spread them in the cleaning liquid. So as to achieve the purpose of cleaning. Although the rupture of the bubbles is very high, because the volume of each bubble is very small, it will not cause mechanical damage and significant temperature rise for the workpiece. The number of air bubbles generated by the vacuum effect in the cleaning solution and everywhere, so the cleaning of the workpiece can be very thorough. Even in the complex workpiece, as long as the cleaning solution can be exposed to the cleaning solution, it can be thoroughly obtained Cleaning. Therefore, as long as the spraying head/plate is immersed in the cleaning solution, all parts of them can be fully cleaned, including deep holes, slits and grooves. Themopolywa cleaning the melting sprinkler silk board compared with other cleaning methods, which has the advantages of good cleaning effect, short time, saving cost, and convenient operation. Therefore, the use of ultrasonic cleaning technology to clean the silk board is the most ideal cleaning method. In the development of the textile industry, more and more companies with ultrasonic cleaning boards will be used, and ultrasonic cleaning machines will be applied more in the textile industry.
Many factories now use ultrasonic cleaning machines to clean the spray board. Ultrasonic cleaning is a clean method of cleaning and effective in industrial application. The vibration is generated under the effect. When the sound pressure reaches a certain value, the bubble will increase rapidly, and then the instant blasting of the closing can reach thousands of atmospheric pressure shock waves. And make them scattered in the cleaning liquid to achieve the purpose of cleaning. Although the rupture of the bubbles is very high, because the volume of each bubble is very small, it will not cause mechanical damage and significant temperature rise for the workpiece. The number of air bubbles generated by the vacuum effect in the cleaning solution and everywhere, so the cleaning of the workpiece can be very thorough. Even in the complex workpiece, as long as the cleaning solution can be exposed to the cleaning solution, it can be thoroughly obtained Cleaning. Therefore, as long as the spraying plate is immersed in the cleaning solution, all parts of them can be fully cleaned, including deep holes, slits and grooves.
. High temperature 煅 burning ultrasonic cleaning fluid polishing: The cleaning process process and characteristics时 Boil for 6 to 8 hours to carbonize the micropores; 2, use the empty effect of ultrasonic cleaning and special cleaning agent for about 1 to 2 hours, decompose the residue in the micropore; r; r; r; r; r; r; r; 3. Use fluid polishing equipment to repeatedly polish the remaining carbides and the burrs in the micro -pores, and ultimately reach completely unobstructed; 4, the total cost of the process is about 12 hours, and the cost of a full set of equipment is invested about 50 about 50 ~ 1 million, whether the mold material that has been burned at high temperature is damaged, the result cannot be obtained in the short term. . Dry ice cleaning: The cleaning process and characteristics: 1. Use the heating pipe or hot air gun to repeat the heating. According to the size of the mold, the heating time is about 30 ~ For more than 200 minutes, the blockage in the micropore softened; 2, the dry ice cleaning system uses the physical reflection of the temperature difference to cause different substances to be separated from different shrinkage speeds. When the dry ice particles of -78 degrees Celsius are exposed to the surface of the dirt, a crispy explosion will cause dirt to shrink and loosen. The dried ice particles will instantly gasify and expand 800 times, generating stripping power, and falling off the dirt from the surface of the object to the surface of the object. , So as to achieve the effect of cleaning; 3, the total time of cleaning the process is about 2 to 5 hours, and the input of the equipment ranges from domestic and imported from 100,000 to 200,000 yuan. There are no supply, storage and transportation require special facilities. At the same time, it can be imagined after repeated thermal expansion and contraction mold materials. . Special cleaning machine (water particles cleaning machine): The cleaning process process and characteristics: 1, high efficiency: adopt German high -end water particles cleaning technology, load intelligent control control The system, one -click start, no person to keep on duty, can be cleaned by water and power, no burning, according to the length and blockage of the silk plate mold, the cleaning time is about 5-30 minutes; 2, environmental protection: its cleaning medium For water, no chemical solvents are required, pure electric drive, no harm to the mold body, no hazardous waste emissions; 3, the input of the equipment depending on the model, about 30,000 to 400,000.
The cleaning effect of ultrasonic cleaning equipment is far better than other cleaning equipment. Weoling spray plate ultrasonic cleaning machine uses an ultrasonic generator to spread to the medium by vibration, so that the cleaning tank emits countless small bubbles. In the ultrasonic cleaning tank, let the small bubbles enter the micropore of the spray plate by vibrating. When the bubbles are hit on the spray plate, the small micro -substances on the spray plate will be quickly peeled and emulsified, so that the workpiece reaches a high degree of cleanliness cleaning Effect. I want to help you!
The spray board is recommended to use ultrasonic cleaning.
one of the important components of the spinning machine. Its role is to transform the adhesive high polymer melt or solution to a fine flow of a specific cross -section through micropholic Or solidify the bath to form silk. During the spinning process, the spraying board will be blocked by mechanical impurities, carbon fiber, gels and other blocking pores. When the spray hole is blocked, the spinning surface will be flowing on the surface of the outer spray/board, causing the original silk to cause the original wire Elasticity of fibrousness and problems such as silk and silk hairs. When the spray hole is completely blocked, it will greatly improve the fiber's organs and have a great impact on the fiber quality. Therefore, it is necessary to clean the spray plate regularly.
The traditional spray plate cleaning method, such as chemistry, physical or machinery, can cause the spray holes to wear, cause erosion, slight cracks, and irregular pores. Therefore In order to solve the problem of jets and cleaning processes, many factories are used to clean the spray plate.
This -wave cleaning is a clean method of cleaning and effective in industry. The working principle is that when the ultrasonic fluid is spread, the tiny bubbles in the cleaning solution are vibrated under the action of the sound field. When the sound pressure reaches the sound pressure, the sound pressure reaches the reach After a certain value, the bubbles will increase rapidly, and then burst into a shock wave that can reach thousands of atmospheric pressure instantly. The shock wave reduces stains and the adhesion of the cleaned workpiece can destroy insoluble stains and spread them in the cleaning liquid. So as to achieve the purpose of cleaning. Although the rupture of the bubbles is very high, because the volume of each bubble is very small, it will not cause mechanical damage and significant temperature rise for the workpiece.
The number of air bubbles generated by the vacuum effect in the cleaning solution and everywhere, so the cleaning of the workpiece can be very thorough. Even in the complex workpiece, as long as the cleaning solution can be exposed to the cleaning solution, it can be thoroughly obtained Cleaning. Therefore, as long as the spraying head/plate is immersed in the cleaning solution, all parts of them can be fully cleaned, including deep holes, slits and grooves.
Themopolywa cleaning the melting sprinkler silk board compared with other cleaning methods, which has the advantages of good cleaning effect, short time, saving cost, and convenient operation. Therefore, the use of ultrasonic cleaning technology to clean the silk board is the most ideal cleaning method.
In the development of the textile industry, more and more companies with ultrasonic cleaning boards will be used, and ultrasonic cleaning machines will be applied more in the textile industry.
Many factories now use ultrasonic cleaning machines to clean the spray board. Ultrasonic cleaning is a clean method of cleaning and effective in industrial application. The vibration is generated under the effect. When the sound pressure reaches a certain value, the bubble will increase rapidly, and then the instant blasting of the closing can reach thousands of atmospheric pressure shock waves. And make them scattered in the cleaning liquid to achieve the purpose of cleaning. Although the rupture of the bubbles is very high, because the volume of each bubble is very small, it will not cause mechanical damage and significant temperature rise for the workpiece.
The number of air bubbles generated by the vacuum effect in the cleaning solution and everywhere, so the cleaning of the workpiece can be very thorough. Even in the complex workpiece, as long as the cleaning solution can be exposed to the cleaning solution, it can be thoroughly obtained Cleaning. Therefore, as long as the spraying plate is immersed in the cleaning solution, all parts of them can be fully cleaned, including deep holes, slits and grooves.
Water particles cleaning machine
. High temperature 煅 burning ultrasonic cleaning fluid polishing:
The cleaning process process and characteristics时 Boil for 6 to 8 hours to carbonize the micropores;
2, use the empty effect of ultrasonic cleaning and special cleaning agent for about 1 to 2 hours, decompose the residue in the micropore; r; r; r; r; r; r; r;
3. Use fluid polishing equipment to repeatedly polish the remaining carbides and the burrs in the micro -pores, and ultimately reach completely unobstructed;
4, the total cost of the process is about 12 hours, and the cost of a full set of equipment is invested about 50 about 50 ~ 1 million, whether the mold material that has been burned at high temperature is damaged, the result cannot be obtained in the short term.
. Dry ice cleaning:
The cleaning process and characteristics:
1. Use the heating pipe or hot air gun to repeat the heating. According to the size of the mold, the heating time is about 30 ~ For more than 200 minutes, the blockage in the micropore softened;
2, the dry ice cleaning system uses the physical reflection of the temperature difference to cause different substances to be separated from different shrinkage speeds. When the dry ice particles of -78 degrees Celsius are exposed to the surface of the dirt, a crispy explosion will cause dirt to shrink and loosen. The dried ice particles will instantly gasify and expand 800 times, generating stripping power, and falling off the dirt from the surface of the object to the surface of the object. , So as to achieve the effect of cleaning;
3, the total time of cleaning the process is about 2 to 5 hours, and the input of the equipment ranges from domestic and imported from 100,000 to 200,000 yuan. There are no supply, storage and transportation require special facilities. At the same time, it can be imagined after repeated thermal expansion and contraction mold materials.
. Special cleaning machine (water particles cleaning machine):
The cleaning process process and characteristics:
1, high efficiency: adopt German high -end water particles cleaning technology, load intelligent control control The system, one -click start, no person to keep on duty, can be cleaned by water and power, no burning, according to the length and blockage of the silk plate mold, the cleaning time is about 5-30 minutes;
2, environmental protection: its cleaning medium For water, no chemical solvents are required, pure electric drive, no harm to the mold body, no hazardous waste emissions;
3, the input of the equipment depending on the model, about 30,000 to 400,000.
The cleaning effect of ultrasonic cleaning equipment is far better than other cleaning equipment.
Weoling spray plate ultrasonic cleaning machine uses an ultrasonic generator to spread to the medium by vibration, so that the cleaning tank emits countless small bubbles. In the ultrasonic cleaning tank, let the small bubbles enter the micropore of the spray plate by vibrating. When the bubbles are hit on the spray plate, the small micro -substances on the spray plate will be quickly peeled and emulsified, so that the workpiece reaches a high degree of cleanliness cleaning Effect.
I want to help you!
Yes, but you also need to use a Pazi