At present, transformer spring shock absorbers are used in many industrial equipment, which actually means that they can have very large shock absorption. The efficacy of sound insulation and noise reduction is more critical to the maintenance of equipment and mechanical equipment can not be easily damaged by vibration on all normal operation, but also greatly increased its service period.
1. The transformer spring shock absorber is not easy to be applied under the condition of relatively serious strong oxidant gas, and is not easy to be less than minus 20℃. Application under the condition of higher than 80℃;
2. Protective measures should be taken to improve the spring shock absorber of diesel generator transformer when transporting;
3. When using the transformer spring shock absorber, pay attention to the matching specifications and models to ensure that its characteristics can be flexibly used;
4. During installation, the relatively large variable of the data format of the transformer spring shock absorber should be reduced and cannot exceed the control value;
5. Pay attention to the frame or shaft in the application process. Common problems such as the impact between the shock absorber and the leaf spring, the damage or fall of the sealing ring and the deformation of the shock absorber's pollution resistance cylinder, gear oil is not enough.
For very large equipment, the accuracy of shock absorber installation is not very critical, moderate installation can have shock absorption effect, can not be unable to have significant shock absorption effect. General of large and medium-sized machinery and equipment are all relatively big strong, moving mechanical equipment is very difficult, in one due to the installation of shock absorber and transformer spring shock absorber error occurs, shock absorbing target weaker if again when installation, so all the project is likely to be more and more complicated and complex, so the installation shock absorbers must have appropriate operating procedures and standards, Can ensure the desired effect of high quality shock absorbers.
At the beginning, we need to choose different specifications and models of shock absorbers according to the total weight and movement mode of mechanical equipment. After selecting the model specifications, choose the appropriate installation method according to the theoretical mechanical periodicity and product modeling design of the equipment. Different mechanical equipment, installation of the key link is not the same. For the total weight and shape design are symmetrical throughout the mechanical equipment, the spring shock absorber should also be placed symmetrically, so as to promote the same direction of the product bearing capacity, deformation is consistent, can effectively have shock absorption effect.