Stone crusher is composed of steel casting, steel will happen under the action of water and oxygen corrosion rusty phenomenon, if the corrosion rusty phenomenon in the production, will be for its service life and the working state of adverse impact, in order to reduce or prevent the formation of this effect, can prevent corrosion rusty phenomenon in the production. So, how to prevent stone crusher corrosion and rust?
1. The stone crushing machine should be stored in a dry room or a sealed room to prevent corrosion and rust caused by the combination of water and oxygen.
2. During the storage period of stone crusher or during the seasonal shutdown, let the crusher run for 5 minutes at least once a month to ensure the lubrication of bearings. If the crusher cannot be operated during storage, manually rotate the flywheel of the crusher to ensure bearing lubrication.
3. Stone crusher parts should be coated with preservatives when removed from the body, so as to prevent rust or corrosion.
4. The outer layer of stone crusher should be coated with a layer of preservative or sealed, which can reduce the probability of rust and better ensure the service life of the machine.
5. Pad electronics or apply preservatives below the parts that contact the ground to prevent rust caused by contact with the ground.
6. When the stone crusher is used again after a long time storage, it is necessary to carry out an overall check on the crusher to prevent rust and corrosion or insufficient lubricating oil from being stored for a long time, thus reducing the efficiency and life of the crusher.