Crusher is commonly used crushing equipment. After using the machine, the correct maintenance and maintenance of the machine must be done. In the actual production process, many customers do not pay attention to the cleaning work of the crusher, but if they do not clean it, it will affect the operation of the equipment and expand the maintenance cost of the equipment. Therefore, cleaning is also an important part of the maintenance of the crusher. Here is a brief introduction to the cleaning work of the crusher:
Note: When cleaning the crusher, the first thing to pay attention to is safety. It is necessary to disconnect the power supply before cleaning.
1, clean up the crusher inlet and outlet
Check the inlet and outlet to see if there is material residue, if there is, it should be handled in time to ensure the cleanliness and cleanliness of the outlet and outlet, otherwise it may affect the quality of the finished product;
2. Clean the crusher belt
Check whether there are oil stains on the belt and belt pulley. If there are, wipe the belt and belt pulley with a clean cloth in time and do not leave any stains or dust.
3. Clean the outside of the crusher
For the external cleaning of the crusher, mainly cleaning the surface of the shell and cleaning the ground. The cleaning work of sand making machine is mainly to prevent the failure of crusher plugging and other problems and ensure the normal operation of the crusher.
4. Clean up the inside of the crushing cavity
Check whether there are other debris in the crushing chamber of the crusher. Note that the power should be disconnected before cleaning. When opening the crushing chamber, clean the residual material around first, and then clean the residual material on the hammer head. Cleaning the crushing chamber should be carried out before the equipment is started to reduce the load when the equipment is started.